 heatsavr1Liquid Pool Cover
Heatsavr is an effective "liquid pool blanket" that greatly reduces heat loss and evaporation from your exposed pool surface.
Heatsavr is made of simple biodegradable ingredients that form the best barrier currently available to slow the heat and water loss that causes high pool room humidity, and high facility heating bills.
Heatsavr slows evaporation substantially. Evaporation is one of the main forms of heat loss from swimming pools and spas. Slowing it can yield large cost savings.
Heatsavr will lower humidity as well as evaporation. It takes money to buy heat, and heat to evaporate water, so slowing evaporation will lower humidity as well as heating costs.
Heatsavr will save energy in EVERY pool, but heat cost savings vary according to the hours of swimmer use per day, ventilation efficiency, and especially the type and cost of fuel used. The cost of energy also varies from region to region. Tests have proven that heat bill savings range from a low of 15.5% at a high use 50 meter municipal pool, to a high of 40% at a low use condominium pool |
 |
|
|
heatsavr3Common Questions about Heatsavr
Can people swim while Heatsavr is in use? Yes. Heatsavr has been designed to be in use 24 hours per day. This gives Heatsavr a distinct advantage over standard pool blankets.
Can Heatsavr be used along with a standard pool blanket? Yes. Heatsavr will work when the blanket is off, and will reduce heat loss around the edges and tears when the blanket is on.
Is Heatsavr safe for filters and plumbing? Yes. Heatsavr is a non-corrosive product that will have no detrimental effect on pipes, valves, chlorine controllers, or filters commonly used in pool applications.
Is Heatsavr environmentally friendly? Yes. Not only does HeatsavrT bio degrade into safe, simple compounds, but the reduction in energy use is especially beneficial. Swimmers in the pool won't know it's in use!
Is Heatsavr easy to use? Yes it certainly is
|
|
heatsavr4Other Information
For best results, Heatsavr should be applied once at the end of the pool-use day.
Add Heatsavr directly to the pool water at a rate of 0.8ml/m². of pool surface area (width x length). 1.0ml/m² for deck level pools and 6ml/m² per day for spas
Heatsavr may be stored for a long period of time without losing strength. Avoid storing below 65 degrees F (18.4 C). If white residue forms at the bottom, immerse bottle in warm (tap) water until residue disappears.
In concentrated form, Heatsavr is flammable and should be stored safely. If eye contact occurs, wash with water for 15 minutes and contact a physician.
Automatic Dosing . This is by far the best solution and is available in both domestic and commercial applications
The 16 litres included in the package will last 400 days for a 50m² inground pool,
that's less than £1 per day (85p actually) |
|
 heatsavr5Conclusion
If your have an odd shaped pool that a normal solar swimming pool cover would be difficult to use then Heatsavr is a great product
Heatsavr is particully usefull in hydrotherpy pools that have lots of hoists,handrails making it difficult to use a pool cover
|
|
|
|
|
|
|
|
 ecosavrLiquid Pool cover for smaller domestic pools
The Science
The key technology of Ecosavr is provided by Heatsavr liquid whose molecules are attracted to water at one end, and repelled by water at the other. They also tangle their side arms together in all directions. This enables a biodegradable, micro thin blanket to cover the surface of your pool. Each molecule links with its neighbours, forming a barrier that slows the evaporation of water molecules.
Evaporation accounts for between 70 and 90% of swimming pool heat loss. Ecosavr can increases pool temperature by creating a transparent pool cover, allowing solar energy to enter the water. By reducing evaporation (up to
40%), the solar energy is trapped, keeping the pool warmer longer and actually extending your pool season. Both water and heat are conserved. UNHEATED POOLS ARE NATURALLY WARMER OR HEATED POOLS COST LESS TO RUN
|
|
 | Coverage
One Ecosavr should cover a pool area of about 36 to 40 square metres for approximately one month; larger pools will require two Ecosavrs.
Remember to restock your pool every four weeks to ensure maximum benefit.
Benefits
•Saves Money Time Water Heat
• Unheated pools are naturally warmer
• Heated pools cost less to run
• No cover to roll up or store
• Pool looks open and refreshing
• One Ecosavr lasts up to a month (up to 40 sq.m)
• Reduces heat & water loss by up to 40%
• Does not interfere with pool filters or chemicals
How Ecosavr Works
Ecosavr is part of a family of water conservation products, which includes Heatsavr and WaterSavr. Heatsavr in bulk liquid form is used on larger domestic pools and commercial pools, whereas WaterSavr is for reservoirs and lakes. Each product uses the same basic principles to inhibit evaporation, reducing heat and water loss. Ecosavr has been scientifically developed as a simple and convenient method of administering the proven Heatsavr liquid into the smaller swimming pool. "Eco" contains enough Heatsavr liquid to treat a standard domestic pool of up to 40 m2 for about one month. Larger pools will require two Eco’s.
Ecosavr has been designed to sink to the bottom of the pool. A patented release valve in the top fin of Ecosavr slowly releases the Heatsavr liquid into your pool. Just cut along the dotted line, and drop "Eco" into your pool. If you have an automatic pool vacuum, please tie "Eco" to a ladder or other fixture to raise it above the pool bottom. A punch-out hole is provided in the top fin.
The Heatsavr liquid released by Ecosavr forms an invisible mono-molecular cover on the surface of the water. The cover is colourless, tasteless, odourless and undetectable on the skin. |
|
|
video< |
|
|
|
