Flocculants 4 Pools

Sparkle Water Clarifier

Sparkle is a Aliphatic Polyamine.
Sparkle makes small particles of dirt stick together so they are more easily filtered out by your filter.
If your pool goes cloudy it can be added to the directly to the pool to clear overnight.

DIRECTIONS FOR USE
To clear cloudy water add 250 ml per 10,000 gallons (45 cubic metres)
Dilute in a plastic bucket and distribute evenly around the pool with the filter operating
To maintain sparkling clear water add 60ml per 10,000 gallons (45 cubic metres) each week

5 Litres Pool Sparkle Clarifier

Ref: 041001014
health and safety £41.99

5 Kg Granular Flocculant Ref: 041001015

£15.59

Aluminium Sulphate is added to the skimmer basket after backwashing to put a gel like coat on the filter which enables particles which would normally pass through the filter to be filtered out. Not suitable for use with cartridge filters or diatomaceous earth filters. This product comes with a 100 gram measure to make dosing your pool more accurate.

health and safety

Jollygell Ref: 039001001a
Jolly Gel was originally manufactured for use with zeolitic high grade filter media used in swimming pool pressure filters. This is because the standard flocculentsbeing marketed, interfere with the ion exchange capability of this type of filter media. It was also foundthat because of Zeolite’s natural structure, the collection of fines when using Jolly Gel was far quicker and more efficient. It was reported later by the pool trade that when used in conjunction with silica sand Jolly Gel noticeably reduced maintenance time when compared with aluminium sulphate or liquid flocculents.

There are two standard sizes manufactured. To use just place the required size cube or brickette in the pump or strainer basket. The Jolly Gel slowly dissolves as the water passes over it on its journey to the filter. The Jolly Gel places a porous, clear membrane screen over the filter media, and penetrates the bed to an average depth of some 15cm (6”). the glutinous structure will remove the finest particles of dust and algae spores.Jolly Gel should not be used with cartridge filters.

ADVANTAGES
• Because of the product’s unique formulation, miniscule particles of dust can be removed from the pool water.
• Continues to work for up to 3 weeks
• Removes algae spores
• Reduces chlorine consumption
• Prepares water to camera ready standards
• Creates no clouding or residual dust
• Places a clear membrane screen across the media to a depth of some 15cm (6”)
• Encapsulates the fine particles and holds them to the bed by means of a mild, glutinous formulation that is flushed away during backwash cycle

When using Jolly Gel for the first time, it is important that the operator observes the pressure reading within the first six hours, or dependent on the filter cycle. The reason is that the product has a far faster collection
capability than aluminium sulphate tablets, so the operator may be unaware that the pressure in the filter could build unnoticed. Once the water has been tidied by Jolly Gel, normal maintenance can be resumed.

Price: £12.50 (Including VAT at 20%)

Stain and scale remover Ref: stainscale
A sequestering solution to inhibit scale formation and mineral precipitation in spa baths and pools
Please note: The process of stain and scale removal is slow so for very high
stain or scale levels apply a second dose after about a week rather than a single larger dose.

Price: £35.99 (Including VAT at 20%)

Zeoclere-30 20kg Ref: 039001002a
Is a selected high-grade zeolitic mineral from the family of 40 different types? The Zeoclere range is specifically for use in swimming pool pressure or gravity filters. It has a purity of between 80-85% and is constant between these percentages. The material has been shown to operate well in both small and large pressure vessels. In tests carried out using a 1 metre column with the flow in a constant backwash mode for 180 days – (24 hours), showed a material loss of 23mm due to attrition. Its clear up rate in new installations has been shown to be faster than that of silica sand and with a improved turbidity of 60% over that of accepted sand. The average ammonia collection for this grade is 23.8 g/lt.This can vary dependent on flow rate. Other advantages of eoclere – a wide temperature performance along with high removal efficiency including iron/zinc/lead/ copper & silver removal.. Because of the high reduction of ammonia removal, the use of chlorine is similarly reduced and on average is quoted that up to 40% savings have been achieved. Zeoclere has a far greater (400%) surface area than silica sand. Therefore, backwashing – where appropriate – can be dramatically reduced, saving many thousands of gallons of water, chemicals and heated water to waste

ADVANTAGES

• Under correct conditions chemical reduction will be achieved along with water saving, power cost and less maintenance.
• High ammonia removal (average 23.8gm/lt.) Dependent on flow rate.
• Iron removal efficiency is high. Far greater surface area than sand.
• Removes odour. Longevity 5 - 7 years.
• Turbidity shown to be up to 60% better than accepted silica sand standard.
• Reduced backwashing by up to 70% over that of sand.
• No health hazard.
• Zeoclere has a far greater (400%) surface area than silica sand. Therefore, backwashing - where appropriate - can be dramatically reduced.
• Because of the high reduction of ammonia removal, the use of chlorine is similarly reduced and on average is
quoted that up to 40% savings have been achieved.

Price: £33.65 (Including VAT at 20%)

Swimming Pool Cover | Fi-Clor Pool Chemicals | Chemicals 4 Pools | Flocculants 4 Pools